French Door Sizes

Common U.S. French door sizes for interior and exterior pairs, including typical widths, heights, and measurement tips for openings.

Advertisement

Overview

French doors usually means a pair of glazed doors that swing freely, often used between living spaces or as an exterior patio opening. In U.S. homes, French door sizing is discussed as a pair width and height, not only as one leaf size.

Interior French door pairs might span openings around 48, 60, or 72 inches wide depending on the design. Exterior French door systems are commonly sold as configured units with frame dimensions listed by the manufacturer. Heights often align with other doors in the home, including approximately 80 inch slabs, with taller options in some lines.

Interior vs Exterior Units

Interior French doors are often lighter, may have different glass types, and usually do not need the weather performance of exterior units. Exterior French doors must account for thresholds, weatherstripping, locking hardware, and sometimes sidelights or transoms.

Because exterior units are engineered systems, replacing them is rarely as simple as matching a single slab width. Use the manufacturer unit size and rough-opening guidance.

Leaf Sizes and Clear Opening

Each leaf in a pair is commonly in a range similar to single interior doors, but the important planning number is the clear opening when one or both leaves are open. Active-leaf configurations (one operating leaf with the other fixed by flush bolts) change how the opening is used day to day.

If furniture movement or accessibility matters, confirm the clear width with the leaf you actually open daily, not only the full pair width on paper.

Measurement Tips

Measure the finished opening width and height in several places. Note swing direction (in or out), handle height preferences, and whether sidelights are part of the assembly. For replacements, photograph the existing frame and sill.

Avoid assuming that a decorative French style single door equals a true French door pair. Product names vary widely across retailers.

Related Guides

Hardware and Operation Notes

French door pairs may use multipoint locks on exterior units and simpler latches on interior pairs. Hardware choice can affect edge preparation and the exact leaf sizing within a framed unit.

When planning a pair, decide whether both leaves operate daily or one leaf stays fixed most of the time. That choice changes clear opening width and how people move furniture through the doorway.

Use manufacturer unit drawings for exterior projects, and treat online size lists as educational ranges rather than a substitute for a specific product sheet.